Kit RTF Vapor DJI O4 Pro TBS Crossfire

Take your foot on each flight with the remote control Team BlackSheep Tango 2 V3! It is equipped with the TBS Micro Tx Crossfire 868MHz to minimize your installation time and maximize reliability. It benefits from the lowest latency and the most direct response thanks to the integrated CRSFShot. It is compatible with the TBS Cloud and has the Open Source firmware. No worries battery level, a LiPo 1S 5000mAh with USB-C 2A charging is integrated into the device (full charge in 2.5 hours). The radio control comes with a voice audio output with audio and haptic vibration alert.   Tango 2 is the smallest radio control on the market. Don't worry about gimbals, they are standard sized lobby effect (M3 screw). The radio is very comfortable in the grip thanks to its rubber handles. Its switches 3 and 2 positions are unbreakable and its antenna is swivelling and can act as a stand at rest. The device has a high resolution black and white OLED display (128 x 96) with backlight.   Highlights TBS Micro Tx Crossfire 868MHz integrated Low latency and direct response Firmware Open Source Integrated LiPo 1S 5000mAh Battery Very comfortable Unbreakable switches

The shipper HOTA D6 Pro features a double AC/DC input, two XT60 outputs with balancing sockets and a backlit screen. This charger of dimensions 108 x 105 x 76 mm with a weight of 555 g will allow to charge your batteries, but also your smartphone thanks to the induction charging system. It supports LiPo, LiVh, LiFe, Lilon and Lixx from 1 to 6S, NiZn, Niicd, NiMH from 1 to 16S, smart batteries from 1 to 6S, PB from 2 to 24V and Enelop from 1 to 16S. It can be powered by a source of 100 to 240V or 6.5 to 30V. The D6 Pro supports up to 325W for each socket.   Both powerful and lightweight, this charger will also allow you to update the system more easily thanks to the integrated MicroUSB connector. Equipped with a highly optimized load algorithm, the D6 Pro offers more reliable load and discharge, including in case of possible surges, over-intensities, overheating and short circuits. It also features automatic detection of LiPo cells, as well as fast storage and charging modes for greater comfort.   Highlights Double entry: 30V/240V MicroUSB connector Two XT60s with balancing sockets Induction charge for smartphone Compatible with most batteries

Trust our experienced technicians for the bind of your remote control to your drone. Both devices must evolve under the TBS Crossfire protocol, as well as at the same frequency. Our experts will put a heart at work so you can enjoy an optimal FPV experience.   This package applies exclusively to products purchased in our shop. It is only valid for unmounted drones accompanied by new products.

Ideal for racing, this LiPo battery Dogcom UCELL is powerful and reactive. The UCELL series of Dogcom brings together quality batteries at an attractive price. This LiPo has a continuous discharge rate of 150C and 300C in gust, a capacity of 1300mAh and a 6S voltage. It is compatible with all drones that host its XT60 connector.   Longer life cycle and lower internal resistance of LiPos Dogcom guarantee reliable use of batteries.  

Need help updating and bindering your DJI Goggles to your FPV drone? Our expert technicians will do it for you! They'll take care of your bind DJI Goggles for optimal pairing and more immersive flying experience.   This package applies exclusively to products purchased in our shop. It is only valid for unmounted drones accompanied by new products.

The DJI Goggles N3 guarantee a unique flying experience. Their innovative design combines a headband and integrated battery to reduce cables and ensure optimal comfort. This FPV DJI headset features a 3.5-inch LCD screen with a FOV of 54°, reducing the risk of dizziness and providing an ideal visual experience. Equipped with the DJI O4 transmission system, the DJI Goggles N3 will allow you to enjoy video feedback of 1080p 60 fps with very low latency. These DJI glasses can also accommodate a microSD and play previously recorded videos, including spherical 2D panoramic videos, in MP4 and MOV formats. Lightweight and ergonomic, these DJI Goggles N3 can accommodate your prescription glasses or contact lenses. Therefore, you won’t need to adjust the diopter or add extra lenses. This FPV headset also offers a battery life of 2.7 hours and features a built-in 2450mAh 2S Li-ion battery in the headband. These glasses also have multiple functionalities such as the AR slider. Thanks to the DJI RC Motion 3, the AR slider will allow you to navigate the Goggles menu for smooth control. You can also defog the screen with one click or record your screen during flight. Strengths 3.5-inch LCD screen with a FOV of 54° Video feedback 1080p 60 fps Can accommodate your glasses/lenses Screen defogging with one click AR slider, video playback

The drone GEPRC Vapor-D5 will ensure great performance. With a wheelbase of 230 mm and a weight of 428 g, this drone GEPRC integrates the transmission system DJI O4 Air Unit Pro, offering a video return up to 1,080p 100 ips with a range of 8 km (EC) and a latency of 15 ms. With it, you can also create 4K 120 ips stabilized shots with a 155° FOV thanks to its CMOS 1/1.3" sensor and RockSteady 3.0+ stabilization system. This VTx DJI also supports 10 bit D-Log M color profile for an incredible color image rendering. You can even add an action camera with the support GoPro provided.   This DeadCat quad BNF has a durable and robust carbon fibre structure with a flat CNC aluminum and anti-vibration silicone cam. It also includes a powerful and reliable configuration consisting of a GEP F722 V2 ICM42688-P flight card, an ESC 4in1 TAKER H60 BLS 60A, engines GEPRC SPEEDX2 2207E of 1 960Kv coupled with propellers Gemfan tripals 5136. It also has a GEP-M10 GPS module for greater security. To power it, use a 6S LiPo (not supplied) via its XT60 connector.   Several versions are available, to choose from below.   Highlights Quad 5" with DeadCat geometry DJI O4 Air Unit Pro Robust and durable structure Integrated GPS Focntionne with a LiPo 6S